Designed and built for long life, these quality parts washers, made of 10 or 12 gauge steel, with dual-zone quick service filters, prove to be at the top of their class in performance.
There are five models to chose from in this series of Parts Washers, with gallon capacities ranging in size from 40 gallons to 260 gallons.The 2000 Series has motor horsepower starting at 3, reaching up to 15, depending on the model chosen.
New Parts Washer Technology
For years, solvent tanks and washer have been the way to clean parts, but these solvent systems are now known to be health hazards. In addition, environmental issues have made solvent washers increasingly expensive to rent or own.
Now there is a solution! Clean parts in minutes with hot water and biodegradable detergents, not solvents. Load it, set and forget it. Simply place your parts in the washer, close the door set the timer, and your parts are clean. It’s automatic. Work on something else. In minutes, your parts are clean. It’s that simple.
Aaladin Parts Washers
Model 2040 & Model 2040E
Features Include:
- 40 gallon water capacity
- 2hp flush seal pump
- 230 volt 1ph
- 7kw heater (230v 1ph or 3ph)
- 12 gauge steel
- S.S. air shield (door cover)
- Seal-less ez-load door
- Quick service fine screen filter
- Large removable basket
- 1000lb. load capacity
- 31″ load height
- 24″ turn table
- 56 – 0° spray jets
- 40″ L x 44″ W x 75″ H
- 810 lb. shipping weight
- ETL & C-ETL Listed
Model 2055 & Model 2055E
Features Include:
- 55 gallon water capacity
- 3hp seal-less pump
- 230 volt 1ph
- 7kw heater (230v 1ph or 3ph)
- 10 gauge steel
- S.S. air shield (door cover)
- Seal-less ez-load door
- Quick service fine screen filter
- Large removable basket
- 1000lb. load capacity
- 31″ load height
- 24″ diameter turntable
- 56 – 0° spray jets
- 40″ L x 55″ W x 75″ H
- 950 lb. shipping weight
- ETL & C-ETL Listed
Model 2085E & Model 2085TE
Features Include:
- Dual zone quick service filters with slide out fine debris screen and small debris catch basket
- 85 gallon water capacity
- 3hp seal-less pump
- 230 volt 3 phase
- 10kw heater (230v 1ph or 3ph)
- 10 gauge steel
- S.S. air shield (door cover)
- Seal-less ez-load door
- Steel oil skimmer
- Dry-floor (waste water) evaporator
- Power vent
- Small parts soaking system
- Large removable basket
- 1,500 lb. load capacity
- 41″ load hieght
- 28″ turn table
- 72-0 degree spray jets
- 45″ L x 61″ W x 87″ H
- 1120 lbs. shipping weight
- ETL & C-ETL Listed
Model 2175E
Features Include:
- Dual zone quick service filters with slide out fine debris screen and small debris catch basket
- 175 gallon water capacity
- 7.5hp seal-less pump
- 230 volt 3 phase
- 24kw heater (230v 1ph or 3ph)
- 10 gauge steel
- S.S. air shield (door cover)
- Seal-less ez-load door
- Steel oil skimmer
- Dry-floor (waste water) evaporator
- Power vent
- Small parts soaking system
- Large removable basket
- 2,000 lb. load capacity
- 54″ load hieght
- 40″ turn table
- 124-0 degree spray jets
- 53″ L x 78″ W x 97″ H
- 2100 lb. shipping weight
- ETL & C-ETL Listed
Features:
Seal-less “EZ Load” Door
Eliminate water on the floor when the door is opened, 99% of the water drains back into the machine. In addition, the cleaning basket is exposed, so it is twice as easy to load and unload than a flat door parts wather. You do not have to put your head and arms into a box of hot steam and hot dripping water to load and unload the parts washer to see if your parts are clean.
Larger Load Heights with Built-In Head Racks
Easily wash the most awkward and tall loads. The head rack and side bars of the turntable allow for easy part tie down and and positioning.
Automatic Oil Skimming System
Standard on: 2040E, 2055E, 2085, 2085TE, 2175E, and 2260E
Optional on: 2040 and 2055
Don’t Pay Expensive Labor to Wash Parts
The AaLadin Cleaning System Parts Washer cleans better than a brush and solvents, and because your parts have been washed with hot water, most parts will air-dry and be ready to use within minutes of removal from your washer. This product reduces cleaning costs by converting the labor currently spent cleaning dirty parts into more productive billable labor.
Dry Floor Evaporator with Power Vent (Standard on all E-models)
Dirty wash water is contaminated with oil, paint and other heavy metal pollutants. Our washer features the original design of the built-in Nothing Down the Drain waste water disposal system. Flip a switch and dispose 97% of teh waste water from your washer. You can also use your waste water disposal system to dispose of dirty wash water from other parts washing machines. Our totally self-contained parts washer evaporates water to eliminate hauling excess water. This limits environmental liability.
Belt-Driven Turntable Drive
All turntable drive parts are on the outside of the cabinet to protect from grime and wear. Belt drive design prevents motor damabe if the load jams.
Two Year Warranty
Turntable and oil skimmer motors.
Lifetime Warranty
Internal turntable bearing
No Waste Water Down the Drain
Models: 2040, 2055E, 2085E, 2085TE, 2175E, and 2260E are build standard with a Dry Floor Water Disposal System and Power Vent.
Pumps and Wear Points
Constructed for durability.